3D Lace Flower size 88*101mm


$7

fsl0044

Author   Nessy_l
The development is based on the idea of the designer Vladasha.

The set consists of two designs:

Design 1
Size        88*101 mm (3.43*3.97 inches)
Color       1
Stitches   15837

Design 2
Size        75*84 mm (2.85*3.28 inches)
Color       1
Stitches   11024

In PES, HUS, DST, EXP, XXX, JEF, VIP, VP3. To convert into other formats, you can use a converter.

Designs embroidered on the two layers of water-soluble stabilizer (non-woven fabrics). The upper and lower thread must be the same color. The tension of the threads 50 to 50 per cent, the upper thread is not overtighten on the underside of the embroidery, the bobbin thread does not over-tighten the front of the embroidery.
Each of the elements is sewn in duplicate, one white, the other pink. A total of four elements is obtained.
After embroidery items should be dipped in water to remove water-soluble stabilizer. Immediately after the dissolution of the stabilizer to get the embroidery from the water. In the wet form to give the desired shape to each element and dried.
Then cut loose thread close to the embroidery (see. Photo thread shown by the arrow).
Assembly. You can manually sew all of the elements together with the bead. Or you can carefully glue using textile glue or glue gun.
Flower, shown in the picture, embroidered with threads Brildor 40 (elements white) and Amann Isacord 40 (elements of pink color). Both thread - embroidery polyester.

Cart  

(empty)

Authors