Fire flower size 180*349mm


$3

flw0145

Author   alenka7

Machine embroidery designs using reverse applique technique.
Suitable for embroidery on knitwear and other fabrics with non-crumbling cuts.

The set includes two designs: design 1 and design 2. For design 1, a version divided into two parts is additionally attached.
The size of the hoop for embroidery in parts must be at least 170*214 mm (6.66*8.39 inches).

Design 1 whole
Size      180*349 mm (7.09*13.71 inches)
Color       1
Stitches   9938

Part 1a
Size      170*164 mm (6.66*6.43 inches)
Colors      2
Stitches   5347

Part 1b
Size      167*214 mm (6.57*8.39 inches)
Colors      2
Stitches   4741

Design 2
Size      120*148 mm (4.72*5.80 inches)
Color       1
Stitches   3590

In PES, HUS, DST, EXP, XXX, JEF, JEF+, VIP, VP3

Technology of embroidery:
- Hoop the tear-off stabilizer.
- Place applique fabric on the stabilizer. A piece of fabric in size should be slightly larger than the size of the design. Fix the application fabric on the stabilizer.
- To impose the main fabric, from above to impose a water-soluble film, fix.
- Embroider design.
- Remove stabilizers.
- Carefully cut the main fabric at a short distance from the lines.
- On the seamy side of the product, cut off excess fabric at a distance of 10-15 mm from the outer contour of the embroidery.

Cart  

(empty)

Authors